Perfect International Instruments Co., Ltd
Perfect International Instruments Co., Ltd Not Guess , But Test !
Add to Cart
300J Pendulum Impact Testing Machine Semi Automatic For Metal Material
Application:
The pendulum impact testing machine is used to measure the resistance of metal materials to impact under dynamic load, so as to judge the quality of the material under dynamic load. This machine is a semi-automatic control testing machine with simple operation and high work efficiency. It is electrically controlled for swing, impact, and placement, and can automatically use the remaining energy after breaking the sample to prepare for the next test. It is especially suitable for continuous testing. Impact test laboratories and metallurgical and machinery manufacturing industries that do a large number of impact tests. The 150J 300J imapct tester complies with the national standard GB/T3808-2002 "Inspection of Pendulum Impact Testing Machines", and conducts impact tests on metal materials according to the national standard GB/T229-2007 "Metal Materials Charpy Pendulum Impact Test Method".
Features:
1. Single-supported column structure, cantilever hanging pendulum, U-shaped pendulum body
2. Impact knife is fixed with screws ,easy to replace
3. Specimen simple beam type support
4. With safety protection pin, and safety protection net
5. The testing machine is semi-automatic control, swing, swing, impact, release pendulum are electrical control, and can use the residual energy after the impulse test sample automatically swing to prepare for the next test.
Impact Tester Parameters:
| Model Name | PT-CJ300 Pendulum Impact Testing Machine Semi Automatic For Metal Material |
| Impact Energy | 300J (big hammer), 150J (small hammer) |
| Impact Speed | 5.2m/s |
| Pendulum Pre-lift Angle | 150° |
| Span Of Specimen Support | 40mm |
| Round Corner Of Support Clamp | R1.0~1.5mm |
| Rounded Corner Of Impact Blade | R2.0~2.5mm; R8 |
| Distance From Pendulum Center To Impact Point | 750mm |
| Standard Specimen Size | 10×10(7.5 or 5)×55mm |
| Pendulum Moment | M=160.7695N.m 80.3848N.m |
| Power Supply | 3 phase 4 wire, 50Hz, 380V, 180W |
| Machine Size | 2124*600*1340mm |
| Weight | About 450Kg |
Meet Standards: ASTM E23 , GB/T3808-2002, GB/T229-2007
Main Configurations :
1. Main machine, 1 set
2. Pendulum: 150J , 300J, 1 piece
3. Inner hexagon wrench( S=12): 1 piece
4. Support adjuster: 1 piece
5. Specimen centralizer: 1 piece
6. Disassembler (for swing): 1 piece
7. Foundation screws: 4 pieces
8. Adjust inclined iron : 4 pieces
9. Protective net ; 1 piece
Pendulum Impact Testing Machine Picture :
Impact Tester Detailed Photos :