Cement 200T Universal Testing Machine , Concrete Testing Equipment Computer Type

Cement Universal Testing Machine 200T Concrete Testing Equipment Computer Type

Cement Universal Testing Machine Application :

Cement Universal Testing Machine 200T Concrete Testing Equipment is the use of fuel tank mounted under the host and mainly used for tensile, compression, bending and shear tests of metal or non-metallic materials, suitable for metallurgy, construction, light industry, aviation, aerospace, materials, universities, research institutes and other fields.Test operations and data processing meet GB228-2002 "metal materials at room temperature tensile test method" requirements.

200T Universal Testing Machine Main Performance Indicators

(1) Maximum Test Force: 2000 KN

(2) The Measuring Range of Test Force: 40KN – 2000 KN

(3) Test Force Display value Accuracy: ± 1%

(4) Displacement Measurement Resolution: 0.01mm

(5) Deformation measurement: The standard configuration for the gauge length 50mm, the maximum deformation of 10mm.

(6) Deformation Measurement Accuracy: ±0.5%

(7) Constant force, Constant deformation, Constant Displacement Control Range: 0.4% ~ 100% FS

(9) Pistons Maximum Speed: 100mm / min

(10) Maximum Tensile Test Space: 800mm (including the piston stroke)

.

(11) Maximum Compression Space: 700mm (including the piston stroke).

(12) Flat Specimen Clamping Thickness: 0-15mm

(13) Round Specimen Clamping Diameter: Ø 13- Ø 26mm or Ø 26- Ø 40mm,Ø 40-Ø 70mm

(14) Pressure Plate Dimensions: 200×200mm

(15) Bending Test Spacing: 350 mm

(16) Branch Roll Width: 140 mm

(17) Fulcrum Diameter: Ø 50 mm

(18) Piston Stroke: 250 mm

(19) Clamping Method: Hydraulic clamping

(20) Sensor and Amplifier: oil pressure sensor, plug in a PC programmable amplifier, automatic zero adjustment, calibration

(21) Dimensions:

Host: 1160×1100×2600 mm

Oil Source: 1100×700×950 mm

Cement Universal Testing Machine 200T Introduction :

Machine Host :

Host is the use of the fuel tank mounted under the host, the tensile space located at between of the upper crossbeam and lower crossbeam, and the compression, bending, shears test space located at between of the lower crossbeam and a host base. The host structure show as below